qidi

Update of the Qidi Series 3

revert klipper and moonraker to working versions from qidi’s repo, and install the latest working version of fluidd

manual install script for qidi max3/plus3/smart3 firmware 4.3.15/4.2.15/4.1.13

Communication with QIDI 3D printers

Dies ist eine Anleitung seinen Qidi Drucker der Serie 3 zu aktualisieren.

mainline klipper, kalico, katapult on the Qidi Q2, without an ST-Link

OrcaSlicer printer profiles for Qidi Plus 4 FDM (+ a lid riser + waste chute)

Collection of Klipper Scripts that work well along-side FreeDi machine configurations.

Read-only multi-vendor filament RFID support for the QIDI Box on QIDI Plus 4

Fork of the official build framework for the Armbian Linux distribution. This repository contains the patches to add support for Qidi X-4,X-6 and X-7 motherboards used in Qidi X-Max 3, X-Smart 3. X-Plus 3, Plus 4 and Q1

Converting a QIDI Q2 to mainline Klipper by replacing the stock electronics with a BTT Manta M8P V2.0 — findings, traced to source.

Qidi X Max3 configuration

A better more professional config for QIDI-Tech X-Plus 3

Recovery & change manual for a heavily-modified QIDI Q2 — drop-in Klipper configs, restore scripts, and root-cause notes.

Stable QiDi Studio on Linux (CachyOS/Arch) via Distrobox & Podman. Features GPU pass-through, region selection, and automatic resource management.

Automatic Z-offset calibration for QIDI Q1 Pro stock firmware: BIQU MicroProbe + stock bed piezo sensors (dual probe)