[rumachan]

A new sensor added after a period without one connected. Old one was removed several months ago, and recorded then.

[elidana]

Hi @rumachan , thanks for that. I might have things mixed up, but based on the comments from @ricardojohansson in the field logs, I wonder if something need to be changed here?

• the serial number for the temperature sensor should be 415554?
• the datalogger code was also updated, does it require a firmware file change to reflect this?

[rumachan]

Yes you are right about the serial number @elidana . The field notes say

A new 40m 107 temperature probe was installed. Adapt number of the new sensor is 415554 and, as these sensors don't come with a serial number, the Adapt number is also to be considered the serial number.

but the equipment change information at the top of the ticket was not changed to reflect that.

There is no mention of a firmware upgrade; it is not the same as a code update. According to Delta, firmware is

Campbell Scientific,CR6,20475,Upper Tama Lake,,2023-07-24T00:09:59Z,9999-01-01T00:00:00Z
Campbell Scientific,CR6,20475,CR6.Std.12.01,2023-07-24T00:09:59Z,9999-01-01T00:00:00Z,

and according today's data file
"TOA5","20475","CR6","20475","CR6.Std.12.01","CPU:TOUTL-uppertamalake-v009.CR6","42137","Data_Table"
So there has been no change.

I will make the required change to the serial number.

[elidana]

looks good, thanks for fixing this @rumachan !