diff --git a/docs/api/rest.rst b/docs/api/rest.rst index 0321f22fc..47e308823 100644 --- a/docs/api/rest.rst +++ b/docs/api/rest.rst @@ -1772,6 +1772,33 @@ recording therefore reports its size once. One fault code can appear on several descriptors, one per occurrence it kept, told apart by ``creation_date``, which is the time that recording was made. +``size`` is the number of bytes the download route below puts on the wire for +that descriptor, so a client can size a buffer or a progress bar from the +listing. For a rosbag held in a single storage file, which is the normal case, +that is the file (``.mcap`` or ``.sqlite3``) and it is the only file the +download serves. The bag directory also holds ``metadata.yaml``, and those bytes +are not part of the transfer. + +.. _rest-recording-size-rule: + +**One recording, one size.** The descriptor ``size`` here, the +``environment_data.snapshots[].size_bytes`` a fault reports for the same +recording, and the ``Content-Length`` of its download are the same number, and +that number is the storage file. A recording also has a footprint on the +gateway host, which is larger because the directory holds ``metadata.yaml`` as +well. That figure is what the recording spends against its storage quota and is +not reported by the API. The one case where the two coincide is a recording +split across several storage files, past the configured maximum bag size: the +download can hand over only one of them, no single file describes the transfer, +and the API reports the recording's total instead. + +For that split case the three numbers stop agreeing, and deliberately so. The +descriptor ``size`` and the nested ``size_bytes`` report the recording's total +while the download's ``Content-Length`` is the one storage file it hands over, +so ``size`` exceeds ``Content-Length``. That gap is the signal: a client that +compares the two can tell the transfer it just made is a part of the recording +rather than the whole of it, which no single reported number could express. + Download Bulk Data ~~~~~~~~~~~~~~~~~~ @@ -1787,6 +1814,9 @@ Download a specific bulk-data file. a pre-#620 fault-code URL is not the segment the client sent, and the format is the one persisted at capture time (``mcap`` or ``sqlite3``). For every other category it is the stored item's own name, e.g. ``report.zip``. +- ``Content-Length``: the served file's length. For how it relates to the + descriptor ``size`` of the same recording, see + :ref:`One recording, one size ` - ``Accept-Ranges``: ``bytes`` - the download is served by a range-aware provider, so a client may fetch part of the file - ``Access-Control-Expose-Headers``: ``Content-Disposition`` diff --git a/docs/tutorials/snapshots.rst b/docs/tutorials/snapshots.rst index f17d55d7e..79e0cf797 100644 --- a/docs/tutorials/snapshots.rst +++ b/docs/tutorials/snapshots.rst @@ -52,11 +52,13 @@ Quick Start ros2 launch ros2_medkit_gateway gateway.launch.py -3. **When a fault is confirmed, query its snapshots:** +3. **When a fault is confirmed, read its snapshots from the fault itself:** + + They are returned inline, under ``environment_data.snapshots``. .. code-block:: bash - curl http://localhost:8080/api/v1/faults/MOTOR_OVERHEAT/snapshots + curl http://localhost:8080/api/v1/apps/motor_controller/faults/MOTOR_OVERHEAT Configuration Options --------------------- diff --git a/postman/collections/ros2-medkit-gateway.postman_collection.json b/postman/collections/ros2-medkit-gateway.postman_collection.json index 5a138a0da..6a3b69f17 100644 --- a/postman/collections/ros2-medkit-gateway.postman_collection.json +++ b/postman/collections/ros2-medkit-gateway.postman_collection.json @@ -1355,74 +1355,6 @@ "description": "List faults with cluster details. Clusters are groups of similar faults that occurred within a time window.\n\nEach cluster includes:\n- `cluster_id`: Unique cluster identifier\n- `rule_id`, `rule_name`: The auto-cluster rule that created this cluster\n- `representative_code`: The fault shown as the cluster representative (based on rule config: first, most_recent, or highest_severity)\n- `representative_severity`: Severity of the representative fault\n- `fault_codes[]`: All fault codes in the cluster\n- `first_at`, `last_at`: Timestamps of first and last faults in cluster" }, "response": [] - }, - { - "name": "GET Fault Snapshots (System-wide)", - "request": { - "method": "GET", - "header": [], - "url": { - "raw": "{{base_url}}/faults/SENSOR_OVERTEMP/snapshots", - "host": [ - "{{base_url}}" - ], - "path": [ - "faults", - "SENSOR_OVERTEMP", - "snapshots" - ] - }, - "description": "Get topic snapshots captured when a fault transitioned to CONFIRMED status. Snapshots provide system state at the moment of fault confirmation for post-mortem debugging. Returns object with fault_code, captured_at timestamp, and topics object keyed by topic name containing message_type and parsed data." - }, - "response": [] - }, - { - "name": "GET Fault Snapshots (Filtered by Topic)", - "request": { - "method": "GET", - "header": [], - "url": { - "raw": "{{base_url}}/faults/SENSOR_OVERTEMP/snapshots?topic=/joint_states", - "host": [ - "{{base_url}}" - ], - "path": [ - "faults", - "SENSOR_OVERTEMP", - "snapshots" - ], - "query": [ - { - "key": "topic", - "value": "/joint_states" - } - ] - }, - "description": "Get snapshots filtered by specific topic name. Use this when you only need data from a particular topic." - }, - "response": [] - }, - { - "name": "GET Component Fault Snapshots", - "request": { - "method": "GET", - "header": [], - "url": { - "raw": "{{base_url}}/components/temp_sensor/faults/SENSOR_OVERTEMP/snapshots", - "host": [ - "{{base_url}}" - ], - "path": [ - "components", - "temp_sensor", - "faults", - "SENSOR_OVERTEMP", - "snapshots" - ] - }, - "description": "Get topic snapshots for a specific component's fault. Same as the system-wide endpoint but scoped to a component context. Useful when working within a component-centric workflow." - }, - "response": [] } ] }, diff --git a/src/ros2_medkit_fault_manager/CHANGELOG.rst b/src/ros2_medkit_fault_manager/CHANGELOG.rst index 078574676..3bce45e15 100644 --- a/src/ros2_medkit_fault_manager/CHANGELOG.rst +++ b/src/ros2_medkit_fault_manager/CHANGELOG.rst @@ -2,6 +2,11 @@ Changelog for package ros2_medkit_fault_manager ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Forthcoming +----------- +* **Breaking (service payload):** the ``GetSnapshots`` response no longer carries ``rosbag.download_url``. It named ``/api/v1/faults/{code}/snapshots/bag``, a route that has not existed since ``0.2.0``, so the field described a download that answers 404. It is dropped rather than repointed: a recording is addressed under its entity as ``/api/v1/{entity-type}/{id}/bulk-data/rosbags/{recording_id}``, and the entity type is part of the gateway's discovery model rather than anything the fault manager holds. The gateway already builds that URI itself, from the recording id it receives on the ``GetFault`` snapshot entries. +* The size a recording reports through ``GetFault``, ``GetSnapshots``, ``GetRosbag`` and ``ListRosbags`` is the storage file a download transfers, read from the bag's own ``metadata.yaml``, instead of the bag directory's total. The two differ by ``metadata.yaml``, which is not served, so every listing used to overstate its own download. The stored ``size_bytes`` and the ``snapshots.rosbag.max_total_storage_mb`` quota are unchanged and still count the whole directory, which is what eviction frees. A recording whose metadata cannot be read, and one split across several storage files past ``snapshots.rosbag.max_bag_size_mb``, both report the directory total as before. + 0.7.0 (2026-08-27) ------------------ * Rosbag black-box recordings are no longer limited to one per fault code. A fault that re-confirms keeps a bounded history of recordings instead of overwriting the previous one, controlled by the new ``snapshots.rosbag.max_bags_per_fault`` (default ``1``, which reproduces the previous behaviour exactly; ``0`` = unlimited). Retention is keep-newest and the bag is unlinked only when no fault still references it, so a burst that shares one recording behaves as before. Internally the ``rosbag_files`` grain changed from "one row per fault" to "one row per (fault, recording) link": ``recording_id`` is now a stored, indexed column, and the legacy column-level ``UNIQUE(fault_code)`` is replaced by a ``UNIQUE INDEX`` on ``(fault_code, file_path)`` through an automatic, idempotent table rebuild on first open. Four latent defects are fixed on the way: quota eviction deleted by fault code rather than by recording, ``get_rosbag_file`` had no ``ORDER BY`` and would have served an arbitrary recording, the stale-row self-heals deleted a fault's entire history because one bag had vanished from disk, and both ``delete_rosbag_file`` / ``delete_rosbag_files`` read only the first ``file_path`` of a fault, so deleting a fault with several recordings removed every row but left all but one bag on disk - unreachable and still charged against the quota (`#623 `_, `#620 `_) diff --git a/src/ros2_medkit_fault_manager/include/ros2_medkit_fault_manager/rosbag_capture.hpp b/src/ros2_medkit_fault_manager/include/ros2_medkit_fault_manager/rosbag_capture.hpp index 10e003606..3e85ea31c 100644 --- a/src/ros2_medkit_fault_manager/include/ros2_medkit_fault_manager/rosbag_capture.hpp +++ b/src/ros2_medkit_fault_manager/include/ros2_medkit_fault_manager/rosbag_capture.hpp @@ -487,4 +487,36 @@ class RosbagCapture { bool dynamic_discovery_{false}; }; +/// Bytes a client receives when it downloads the recording at @p bag_path. +/// +/// A recording occupies a directory and is served as a single file. Those are two +/// different quantities and the fault manager needs both. ``RosbagFileInfo::size_bytes`` +/// is the directory total, because that is what the recording costs against +/// ``max_total_storage_mb`` and what eviction frees. This is the other one: the storage +/// file the download hands over, which is what a caller sizing a buffer or a progress +/// bar needs. Reporting the total in its place overstated every download by +/// ``metadata.yaml``, and on a short recording that is around a tenth of the transfer. +/// +/// The file is the one ``metadata.yaml`` names in ``relative_file_paths``, read through +/// the same library that wrote it, so this answers with the bag's own record of its +/// contents rather than by guessing from a file extension. +/// +/// Falls back to @p stored_total_bytes, never to zero, when no single served file can +/// be named: +/// - no ``metadata.yaml``, or one that cannot be read or parsed. +/// - ``relative_file_paths`` naming other than exactly one file. Past +/// ``max_bag_size_mb`` rosbag2 splits a recording across several storage files, and +/// then no single number describes the download at all. +/// - a named file that cannot be stat'd. +/// +/// None of those is an error worth logging. A pre-metadata bag and a split bag are +/// both normal, this runs once per reported row on every request, and the fallback is +/// a real measurement of the recording rather than a failure sentinel. A zero would +/// not be: it would describe the recording as empty. +/// +/// @param bag_path Bag directory as stored in ``RosbagFileInfo::file_path`` +/// @param stored_total_bytes The stored directory total, used as the fallback +/// @return Size of the served storage file, or @p stored_total_bytes +size_t rosbag_served_bytes(const std::string & bag_path, size_t stored_total_bytes); + } // namespace ros2_medkit_fault_manager diff --git a/src/ros2_medkit_fault_manager/src/fault_manager_node.cpp b/src/ros2_medkit_fault_manager/src/fault_manager_node.cpp index 146f0e3b4..962cdb691 100644 --- a/src/ros2_medkit_fault_manager/src/fault_manager_node.cpp +++ b/src/ros2_medkit_fault_manager/src/fault_manager_node.cpp @@ -1158,7 +1158,9 @@ void FaultManagerNode::handle_get_fault(const std::shared_ptrget_rosbag_file(request->fault_code); if (rosbag_info) { nlohmann::json rosbag_json; rosbag_json["available"] = true; rosbag_json["duration_sec"] = rosbag_info->duration_sec; - rosbag_json["size_bytes"] = rosbag_info->size_bytes; + rosbag_json["size_bytes"] = rosbag_served_bytes(rosbag_info->file_path, rosbag_info->size_bytes); rosbag_json["format"] = rosbag_info->format; - rosbag_json["download_url"] = "/api/v1/faults/" + request->fault_code + "/snapshots/bag"; result["rosbag"] = rosbag_json; } else { result["rosbag"] = {{"available", false}}; @@ -1598,7 +1609,7 @@ void FaultManagerNode::handle_get_rosbag(const std::shared_ptrfault_codes = attached_codes; response->format = rosbag_info->format; response->duration_sec = rosbag_info->duration_sec; - response->size_bytes = rosbag_info->size_bytes; + response->size_bytes = rosbag_served_bytes(rosbag_info->file_path, rosbag_info->size_bytes); RCLCPP_DEBUG(get_logger(), "GetRosbag returned file '%s' for %s", rosbag_info->file_path.c_str(), subject.c_str()); } @@ -1635,7 +1646,7 @@ void FaultManagerNode::handle_list_rosbags( response->file_paths.push_back(info.file_path); response->formats.push_back(info.format); response->durations_sec.push_back(info.duration_sec); - response->sizes_bytes.push_back(info.size_bytes); + response->sizes_bytes.push_back(rosbag_served_bytes(info.file_path, info.size_bytes)); response->created_at_ns.push_back(info.created_at_ns); } diff --git a/src/ros2_medkit_fault_manager/src/rosbag_capture.cpp b/src/ros2_medkit_fault_manager/src/rosbag_capture.cpp index 01d4b0c9e..40afd6238 100644 --- a/src/ros2_medkit_fault_manager/src/rosbag_capture.cpp +++ b/src/ros2_medkit_fault_manager/src/rosbag_capture.cpp @@ -30,6 +30,8 @@ #include #include #include +#include +#include #include #include #include @@ -1325,6 +1327,12 @@ std::string RosbagCapture::generate_bag_path(const std::string & fault_code) con return base_path + "/" + bag_directory_name(fault_code, timestamp); } +// The recording's footprint, and the figure stored on its rows. It is what the +// recording costs against max_total_storage_mb and what evicting it frees, so it +// counts everything in the directory including metadata.yaml and every file of a +// split. rosbag_served_bytes() below is the other measurement of the same +// recording, the one the API reports, and the two are deliberately different +// numbers - see its comment for which question each answers. size_t RosbagCapture::calculate_bag_size(const std::string & bag_path) const { size_t total_size = 0; @@ -1345,6 +1353,46 @@ size_t RosbagCapture::calculate_bag_size(const std::string & bag_path) const { return total_size; } +// The bytes a download of this recording actually transfers, which is the one +// storage file the bulk-data route hands over. calculate_bag_size() above answers +// the storage question (what the recording costs on disk) and this one answers the +// client's question (what is about to arrive). Reporting the footprint in place of +// the transfer is what made every listing overstate its own download by +// metadata.yaml. Keeping them separate is what lets the quota stay honest while the +// API does. +// +// The served file is read out of the bag's own metadata.yaml rather than guessed +// from a file extension, so a bag that names something unexpected is still described +// by its own record. See the header for every fallback and why none of them logs. +size_t rosbag_served_bytes(const std::string & bag_path, size_t stored_total_bytes) { + try { + rosbag2_storage::MetadataIo metadata_io; + if (!metadata_io.metadata_file_exists(bag_path)) { + return stored_total_bytes; + } + + const rosbag2_storage::BagMetadata metadata = metadata_io.read_metadata(bag_path); + // Exactly one, or there is no single served file to measure. Zero means a bag + // that recorded nothing addressable. More than one means a split, where the + // download hands over one segment and the rest are unreachable through it - a + // defect of the download route, not something a size can paper over. + if (metadata.relative_file_paths.size() != 1) { + return stored_total_bytes; + } + + const std::filesystem::path storage_file = std::filesystem::path(bag_path) / metadata.relative_file_paths.front(); + std::error_code ec; + const auto served = std::filesystem::file_size(storage_file, ec); + if (ec) { + return stored_total_bytes; + } + return static_cast(served); + } catch (const std::exception &) { + // read_metadata throws on a metadata.yaml that cannot be read or parsed. + return stored_total_bytes; + } +} + std::vector RosbagCapture::evict_bags_over_quota(FaultStorage * storage, size_t max_bytes) { size_t current_bytes = storage->get_total_rosbag_storage_bytes(); if (current_bytes <= max_bytes) { diff --git a/src/ros2_medkit_fault_manager/test/test_fault_manager.cpp b/src/ros2_medkit_fault_manager/test/test_fault_manager.cpp index 92b0abaaf..bae9c3cde 100644 --- a/src/ros2_medkit_fault_manager/test/test_fault_manager.cpp +++ b/src/ros2_medkit_fault_manager/test/test_fault_manager.cpp @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -26,20 +27,25 @@ #include #include +#include +#include #include #include "rclcpp/rclcpp.hpp" #include "ros2_medkit_fault_manager/fault_audit_log.hpp" #include "ros2_medkit_fault_manager/fault_manager_node.hpp" #include "ros2_medkit_fault_manager/fault_storage.hpp" +#include "ros2_medkit_fault_manager/rosbag_capture.hpp" #include "ros2_medkit_fault_manager/sqlite_fault_storage.hpp" #include "ros2_medkit_msgs/msg/fault.hpp" #include "ros2_medkit_msgs/msg/fault_event.hpp" #include "ros2_medkit_msgs/msg/snapshot.hpp" #include "ros2_medkit_msgs/srv/clear_fault.hpp" #include "ros2_medkit_msgs/srv/get_fault.hpp" +#include "ros2_medkit_msgs/srv/get_rosbag.hpp" #include "ros2_medkit_msgs/srv/get_snapshots.hpp" #include "ros2_medkit_msgs/srv/list_faults_for_entity.hpp" +#include "ros2_medkit_msgs/srv/list_rosbags.hpp" #include "ros2_medkit_msgs/srv/report_fault.hpp" using ros2_medkit_fault_manager::clamp_debounce_counter; @@ -52,7 +58,10 @@ using ros2_medkit_msgs::msg::Fault; using ros2_medkit_msgs::msg::FaultEvent; using ros2_medkit_msgs::srv::ClearFault; using ros2_medkit_msgs::srv::GetFault; +using ros2_medkit_msgs::srv::GetRosbag; +using ros2_medkit_msgs::srv::GetSnapshots; using ros2_medkit_msgs::srv::ListFaultsForEntity; +using ros2_medkit_msgs::srv::ListRosbags; using ros2_medkit_msgs::srv::ReportFault; /// Default debounce config for tests (matches DebounceConfig defaults: threshold=-1, no healing) @@ -1551,6 +1560,199 @@ TEST_F(FreezeFrameRetentionTest, GetFaultServesRetainedFreezeFrameAfterClear) { EXPECT_DOUBLE_EQ(parsed["/ff_pressure"]["data"].get(), 91.25); } +// === Rosbag reporting through the services === + +namespace { + +/// A bag directory on disk plus the two sizes a recording has: the storage file the +/// download hands over, and the directory total the storage quota is charged. +struct ReportedBag { + explicit ReportedBag(const std::string & label) { + dir = std::filesystem::temp_directory_path() / + ("fm_reported_bag_" + std::to_string(::getpid()) + "_" + label + "_" + std::to_string(counter++)); + std::filesystem::create_directories(dir); + + { + std::ofstream out(dir / storage_file, std::ios::binary); + out << std::string(8192, 'x'); + } + rosbag2_storage::BagMetadata metadata; + metadata.storage_identifier = "sqlite3"; + metadata.relative_file_paths = {storage_file}; + metadata.duration = std::chrono::nanoseconds(0); + metadata.starting_time = std::chrono::time_point(std::chrono::nanoseconds(0)); + metadata.message_count = 0; + rosbag2_storage::MetadataIo().write_metadata(dir.string(), metadata); + + for (const auto & entry : std::filesystem::recursive_directory_iterator(dir)) { + if (entry.is_regular_file()) { + footprint += static_cast(entry.file_size()); + } + } + served = static_cast(std::filesystem::file_size(dir / storage_file)); + } + + ~ReportedBag() { + std::error_code ec; + std::filesystem::remove_all(dir, ec); + } + + ReportedBag(const ReportedBag &) = delete; + ReportedBag & operator=(const ReportedBag &) = delete; + + /// The row the capture would have stored for @p fault_code: footprint, not served. + ros2_medkit_fault_manager::RosbagFileInfo row_for(const std::string & fault_code) const { + ros2_medkit_fault_manager::RosbagFileInfo info; + info.fault_code = fault_code; + info.file_path = dir.string(); + info.recording_id = ros2_medkit_fault_manager::rosbag_recording_id(info.file_path); + info.format = "sqlite3"; + info.duration_sec = 5.0; + info.size_bytes = footprint; + info.created_at_ns = 1738664999000000000; + return info; + } + + static constexpr const char * storage_file = "recording_0.db3"; + std::filesystem::path dir; + size_t footprint{0}; + size_t served{0}; + static int counter; +}; + +int ReportedBag::counter = 0; + +} // namespace + +// A rosbag snapshot advertises a download, so the size beside it has to be the size +// of that download. The row keeps the recording's directory total for the storage +// quota. This checks the service reports the served file instead, which is the +// wiring the helper's own unit tests in test_rosbag_capture cannot see. +TEST_F(FaultEventPublishingTest, GetFaultReportsARecordingsServedBytesNotItsFootprint) { + ReportedBag bag("get_fault"); + ASSERT_GT(bag.footprint, bag.served) << "metadata.yaml did not land, so there is nothing to tell apart"; + + ASSERT_TRUE(call_report_fault("SERVED_BYTES_FAULT", Fault::SEVERITY_ERROR, "/test_node")); + fault_manager_->get_storage_for_test().store_rosbag_file(bag.row_for("SERVED_BYTES_FAULT")); + + auto response = call_get_fault("SERVED_BYTES_FAULT"); + ASSERT_TRUE(response.has_value()); + ASSERT_TRUE(response->success); + + const ros2_medkit_msgs::msg::Snapshot * rosbag_snapshot = nullptr; + for (const auto & snapshot : response->environment_data.snapshots) { + if (snapshot.type == ros2_medkit_msgs::msg::Snapshot::TYPE_ROSBAG) { + rosbag_snapshot = &snapshot; + break; + } + } + ASSERT_NE(rosbag_snapshot, nullptr) << "the stored recording was not reported at all"; + EXPECT_EQ(rosbag_snapshot->size_bytes, bag.served) << "the snapshot must state the bytes a download transfers"; + EXPECT_NE(rosbag_snapshot->size_bytes, bag.footprint) << "the directory total is the quota's figure, not the API's"; + + // The row itself is untouched: the quota still sees the whole recording. + auto row = fault_manager_->get_storage().get_rosbag_file("SERVED_BYTES_FAULT"); + ASSERT_TRUE(row.has_value()); + EXPECT_EQ(row->size_bytes, bag.footprint) << "reporting must not have rewritten what the quota counts"; +} + +// The other three services that quote a recording's size. GetFault above covers the +// snapshot entry. These are the remaining answers, each reached through its own +// service call rather than through the helper. +TEST_F(FaultEventPublishingTest, EveryRosbagServiceReportsTheServedBytes) { + ReportedBag bag("all_services"); + ASSERT_GT(bag.footprint, bag.served) << "metadata.yaml did not land, so there is nothing to tell apart"; + + ASSERT_TRUE(call_report_fault("ALL_SERVICES_FAULT", Fault::SEVERITY_ERROR, "/test_node")); + const auto row = bag.row_for("ALL_SERVICES_FAULT"); + fault_manager_->get_storage_for_test().store_rosbag_file(row); + + const std::string ns = test_node_->get_namespace(); + + // GetSnapshots: the rosbag block of the JSON payload. + { + auto client = test_node_->create_client(ns + "/fault_manager/get_snapshots"); + ASSERT_TRUE(client->wait_for_service(std::chrono::seconds(5))); + auto request = std::make_shared(); + request->fault_code = "ALL_SERVICES_FAULT"; + auto future = client->async_send_request(request); + ASSERT_TRUE(spin_until_future_ready(future)); + auto response = future.get(); + ASSERT_TRUE(response->success) << response->error_message; + + auto payload = nlohmann::json::parse(response->data); + ASSERT_TRUE(payload.contains("rosbag")); + ASSERT_TRUE(payload["rosbag"].value("available", false)); + EXPECT_EQ(payload["rosbag"]["size_bytes"].get(), bag.served); + EXPECT_NE(payload["rosbag"]["size_bytes"].get(), bag.footprint); + } + + // GetRosbag: the single-recording lookup. + { + auto client = test_node_->create_client(ns + "/fault_manager/get_rosbag"); + ASSERT_TRUE(client->wait_for_service(std::chrono::seconds(5))); + auto request = std::make_shared(); + request->recording_id = row.recording_id; + request->fault_code = "ALL_SERVICES_FAULT"; + auto future = client->async_send_request(request); + ASSERT_TRUE(spin_until_future_ready(future)); + auto response = future.get(); + ASSERT_TRUE(response->success) << response->error_message; + EXPECT_EQ(response->size_bytes, bag.served); + EXPECT_NE(response->size_bytes, bag.footprint); + } + + // ListRosbags: the per-entity listing, keyed by the fault's reporting source. + { + auto client = test_node_->create_client(ns + "/fault_manager/list_rosbags"); + ASSERT_TRUE(client->wait_for_service(std::chrono::seconds(5))); + auto request = std::make_shared(); + request->entity_fqn = "/test_node"; + auto future = client->async_send_request(request); + ASSERT_TRUE(spin_until_future_ready(future)); + auto response = future.get(); + ASSERT_TRUE(response->success) << response->error_message; + ASSERT_EQ(response->sizes_bytes.size(), 1u) << "the stored recording was not listed"; + EXPECT_EQ(response->sizes_bytes[0], bag.served); + EXPECT_NE(response->sizes_bytes[0], bag.footprint); + } +} + +// The legacy /faults/{code}/snapshots/bag route was removed, so a payload naming it +// hands the caller a 404. Nothing in this repo reads the field, and a recording is +// addressed under its entity, which the fault manager cannot resolve, so the field +// is gone rather than repointed. +TEST_F(FaultEventPublishingTest, GetSnapshotsDoesNotAdvertiseARouteThatWasRemoved) { + ReportedBag bag("no_download_url"); + + ASSERT_TRUE(call_report_fault("NO_URL_FAULT", Fault::SEVERITY_ERROR, "/test_node")); + fault_manager_->get_storage_for_test().store_rosbag_file(bag.row_for("NO_URL_FAULT")); + + auto client = test_node_->create_client(std::string(test_node_->get_namespace()) + + "/fault_manager/get_snapshots"); + ASSERT_TRUE(client->wait_for_service(std::chrono::seconds(5))); + auto request = std::make_shared(); + request->fault_code = "NO_URL_FAULT"; + auto future = client->async_send_request(request); + ASSERT_TRUE(spin_until_future_ready(future)); + auto response = future.get(); + ASSERT_TRUE(response->success) << response->error_message; + + auto payload = nlohmann::json::parse(response->data); + + // Positive control for the absence below: the rosbag block IS present and populated, + // so a missing key is a dropped field and not an empty or absent payload. + ASSERT_TRUE(payload.contains("rosbag")) << "control: the payload carries a rosbag block"; + ASSERT_TRUE(payload["rosbag"].value("available", false)) << "control: the recording was found"; + ASSERT_TRUE(payload["rosbag"].contains("format")) << "control: the block still carries its other fields"; + + EXPECT_FALSE(payload["rosbag"].contains("download_url")) + << "the payload advertises a route that answers 404: " << payload["rosbag"].dump(); + // Nowhere else in the payload either. + EXPECT_EQ(payload.dump().find("snapshots/bag"), std::string::npos) + << "a removed route is named somewhere in the payload: " << payload.dump(); +} + // snapshots.max_per_fault and snapshots.retain_on_clear are independent settings. class UnlimitedSnapshotRetentionTest : public FaultEventPublishingTest { protected: diff --git a/src/ros2_medkit_fault_manager/test/test_rosbag_capture.cpp b/src/ros2_medkit_fault_manager/test/test_rosbag_capture.cpp index 92e81667c..8fa660892 100644 --- a/src/ros2_medkit_fault_manager/test/test_rosbag_capture.cpp +++ b/src/ros2_medkit_fault_manager/test/test_rosbag_capture.cpp @@ -32,6 +32,8 @@ #include #include +#include +#include #include #include "rclcpp/rclcpp.hpp" @@ -566,6 +568,175 @@ TEST(RosbagHighBandwidthTopicTest, MatchesSensorStreamsButNotLookalikes) { EXPECT_FALSE(RosbagCapture::is_high_bandwidth_topic("/cmd_vel")); } +// === Reported size vs stored size === +// A recording is stored as a directory and served as a single file. The row keeps the +// directory total, because that is what the recording costs against the storage quota +// (see ABoundaryRecordingSplitsAndReportsTheWholeBag, which pins that). What the API +// reports is the other number: the bytes a download of it transfers. + +namespace { + +/// A bag directory carrying a real ``metadata.yaml``, written by the same library +/// rosbag2 writes it with, so the parse under test is the parse that runs in +/// production rather than a hand-copied literal that can drift from it. +class ServedBytesBag { + public: + explicit ServedBytesBag(const std::string & label) { + dir_ = std::filesystem::temp_directory_path() / + ("served_bytes_" + std::to_string(::getpid()) + "_" + label + "_" + std::to_string(counter_++)); + std::filesystem::create_directories(dir_); + } + + ~ServedBytesBag() { + std::error_code ec; + std::filesystem::remove_all(dir_, ec); + } + + ServedBytesBag(const ServedBytesBag &) = delete; + ServedBytesBag & operator=(const ServedBytesBag &) = delete; + + /// Write a storage file of @p bytes and return its name, relative to the bag. + std::string add_storage_file(const std::string & name, size_t bytes) { + std::ofstream out(dir_ / name, std::ios::binary); + out << std::string(bytes, 'x'); + return name; + } + + void write_metadata(const std::vector & relative_file_paths) { + rosbag2_storage::BagMetadata metadata; + metadata.storage_identifier = "sqlite3"; + metadata.relative_file_paths = relative_file_paths; + metadata.duration = std::chrono::nanoseconds(0); + metadata.starting_time = std::chrono::time_point(std::chrono::nanoseconds(0)); + metadata.message_count = 0; + rosbag2_storage::MetadataIo().write_metadata(dir_.string(), metadata); + } + + /// What the row stores: every regular file under the directory. + size_t directory_total() const { + size_t total = 0; + for (const auto & entry : std::filesystem::recursive_directory_iterator(dir_)) { + if (entry.is_regular_file()) { + total += static_cast(entry.file_size()); + } + } + return total; + } + + size_t file_size_of(const std::string & name) const { + return static_cast(std::filesystem::file_size(dir_ / name)); + } + + const std::filesystem::path & dir() const { + return dir_; + } + std::string path() const { + return dir_.string(); + } + + private: + std::filesystem::path dir_; + static int counter_; +}; + +int ServedBytesBag::counter_ = 0; + +} // namespace + +TEST(RosbagServedBytesTest, ReportsTheStorageFileNotTheDirectoryTotal) { + ServedBytesBag bag("single"); + const std::string db3 = bag.add_storage_file("recording_0.db3", 4096); + bag.write_metadata({db3}); + + const size_t served = bag.file_size_of(db3); + const size_t stored_total = bag.directory_total(); + // Not vacuous: metadata.yaml is on disk too, so the two numbers really differ. + ASSERT_GT(stored_total, served) << "metadata.yaml did not land, so there is nothing to tell apart"; + + EXPECT_EQ(ros2_medkit_fault_manager::rosbag_served_bytes(bag.path(), stored_total), served) + << "the reported size must be what a download transfers"; + EXPECT_NE(ros2_medkit_fault_manager::rosbag_served_bytes(bag.path(), stored_total), stored_total) + << "metadata.yaml is not served, so it must not be counted"; +} + +TEST(RosbagServedBytesTest, AnUnreadableMetadataFallsBackToTheStoredTotalNotToZero) { + // Positive control on the same harness: with the metadata intact this bag does + // answer with its storage file, so a fallback below is the damaged metadata and + // not a helper that never resolves anything. + ServedBytesBag bag("damaged"); + const std::string db3 = bag.add_storage_file("recording_0.db3", 2048); + bag.write_metadata({db3}); + const size_t stored_total = bag.directory_total(); + ASSERT_EQ(ros2_medkit_fault_manager::rosbag_served_bytes(bag.path(), stored_total), bag.file_size_of(db3)) + << "control: an intact bag resolves its storage file"; + + // Now break only the metadata, leaving the storage file untouched. + { + std::ofstream out(bag.dir() / "metadata.yaml", std::ios::binary | std::ios::trunc); + out << "rosbag2_bagfile_information: [this is not a mapping\n"; + } + const size_t stored_total_after = bag.directory_total(); + EXPECT_EQ(ros2_medkit_fault_manager::rosbag_served_bytes(bag.path(), stored_total_after), stored_total_after) + << "an unparseable metadata.yaml falls back to the stored total"; + EXPECT_NE(ros2_medkit_fault_manager::rosbag_served_bytes(bag.path(), stored_total_after), 0u) + << "and never to zero, which would describe the recording as empty"; +} + +TEST(RosbagServedBytesTest, AMissingMetadataFallsBackToTheStoredTotal) { + // A bag written before metadata was kept, or one whose metadata was lost. + ServedBytesBag bag("nometa"); + bag.add_storage_file("recording_0.db3", 1024); + const size_t stored_total = bag.directory_total(); + + EXPECT_EQ(ros2_medkit_fault_manager::rosbag_served_bytes(bag.path(), stored_total), stored_total); +} + +TEST(RosbagServedBytesTest, ANamedFileThatIsNotOnDiskFallsBackToTheStoredTotal) { + ServedBytesBag bag("ghost"); + bag.add_storage_file("recording_0.db3", 1024); + bag.write_metadata({"recording_1.db3"}); // names a segment that was never written + const size_t stored_total = bag.directory_total(); + + EXPECT_EQ(ros2_medkit_fault_manager::rosbag_served_bytes(bag.path(), stored_total), stored_total); +} + +TEST(RosbagServedBytesTest, ASingleNamedFileIsSizedEvenWithAStrayFileBesideIt) { + // A leftover segment or a copy sitting beside the recording must not change + // which file is measured. The metadata names one file and that is the file. + // + // This is also the fault manager's half of a cross-package agreement: the + // gateway sizes the same directory shape through its own resolver, and its + // TheMetadataNamesTheStorageFileRatherThanDirectoryOrder asserts the same + // 4096. Directory order decided the gateway's answer until it read this field + // too, and the two sides reported different sizes for one recording. + ServedBytesBag bag("stray"); + const std::string named = bag.add_storage_file("recording_0.db3", 4096); + bag.add_storage_file("recording_1.db3", 65536); + bag.write_metadata({named}); + const size_t stored_total = bag.directory_total(); + + const size_t reported = ros2_medkit_fault_manager::rosbag_served_bytes(bag.path(), stored_total); + EXPECT_EQ(reported, bag.file_size_of(named)); + EXPECT_EQ(reported, 4096u) << "the same number the gateway's listing reports for this shape"; + EXPECT_NE(reported, bag.file_size_of("recording_1.db3")) << "the stray file is not the recording"; + EXPECT_NE(reported, stored_total); +} + +TEST(RosbagServedBytesTest, ASplitRecordingFallsBackToTheStoredTotal) { + // Past max_bag_size_mb rosbag2 splits a recording across several storage files. + // The download hands over one of them, so no single file is "the" transfer and the + // recording's own total is the only number that describes it honestly. + ServedBytesBag bag("split"); + const std::string first = bag.add_storage_file("recording_0.db3", 4096); + const std::string second = bag.add_storage_file("recording_1.db3", 2048); + bag.write_metadata({first, second}); + const size_t stored_total = bag.directory_total(); + + const size_t reported = ros2_medkit_fault_manager::rosbag_served_bytes(bag.path(), stored_total); + EXPECT_EQ(reported, stored_total); + EXPECT_NE(reported, bag.file_size_of(first)) << "picking a segment would advertise a partial recording as whole"; +} + // Fault lifecycle tests TEST_F(RosbagCaptureTest, OnFaultPrefailedWhileDisabled) { diff --git a/src/ros2_medkit_gateway/README.md b/src/ros2_medkit_gateway/README.md index 0cff2b0d3..8227c874f 100644 --- a/src/ros2_medkit_gateway/README.md +++ b/src/ros2_medkit_gateway/README.md @@ -980,13 +980,14 @@ Faults represent errors or warnings reported by system components. The gateway p - `GET /api/v1/faults` - List all faults across the system (convenience API for dashboards) - `GET /api/v1/faults/stream` - Real-time fault event stream via Server-Sent Events (SSE) -- `GET /api/v1/faults/{fault_code}/snapshots` - Get topic snapshots captured when fault was confirmed -- `GET /api/v1/faults/{fault_code}/snapshots/bag` - Download rosbag file for fault (if rosbag capture enabled) - `GET /api/v1/components/{component_id}/faults` - List faults for a specific component - `GET /api/v1/components/{component_id}/faults/{fault_code}` - Get a specific fault -- `GET /api/v1/components/{component_id}/faults/{fault_code}/snapshots` - Get snapshots for a component's fault - `DELETE /api/v1/components/{component_id}/faults/{fault_code}` - Clear a fault +Snapshots are not a separate endpoint. A fault response carries them inline in +`environment_data.snapshots[]`, and a rosbag recording is downloaded through the +bulk-data endpoints (`GET /api/v1/{entity-path}/bulk-data/rosbags/{id}`). + #### GET /api/v1/faults List all faults across the system. This is a convenience API for dashboards and monitoring tools that need a complete system health view without iterating over individual components. @@ -1103,79 +1104,12 @@ curl http://localhost:8080/api/v1/components/nav2_controller/faults } ``` -#### GET /api/v1/faults/{fault_code}/snapshots - -Get topic snapshots captured when a fault transitioned to CONFIRMED status. Snapshots provide system state at the moment of fault confirmation for debugging purposes. +#### Snapshots -**Query Parameters:** -- `topic` - (optional) Filter by specific topic name - -**Example:** -```bash -curl http://localhost:8080/api/v1/faults/MOTOR_OVERHEAT/snapshots -curl http://localhost:8080/api/v1/faults/MOTOR_OVERHEAT/snapshots?topic=/joint_states -``` - -**Response (200 OK):** -```json -{ - "fault_code": "MOTOR_OVERHEAT", - "captured_at": 1735830000.123, - "topics": { - "/joint_states": { - "message_type": "sensor_msgs/msg/JointState", - "data": {"name": ["joint1"], "position": [1.57]} - }, - "/cmd_vel": { - "message_type": "geometry_msgs/msg/Twist", - "data": {"linear": {"x": 0.5}, "angular": {"z": 0.1}} - } - } -} -``` - -**Response (200 OK - No snapshots):** -```json -{ - "fault_code": "MOTOR_OVERHEAT", - "topics": {} -} -``` - -**Response (404 Not Found):** -```json -{ - "error": "Fault not found", - "fault_code": "NONEXISTENT_FAULT" -} -``` - -#### GET /api/v1/components/{component_id}/faults/{fault_code}/snapshots - -Get topic snapshots for a specific component's fault. Same as the system-wide endpoint but scoped to a component. - -**Query Parameters:** -- `topic` - (optional) Filter by specific topic name - -**Example:** -```bash -curl http://localhost:8080/api/v1/components/motor_controller/faults/MOTOR_OVERHEAT/snapshots -``` - -**Response (200 OK):** -```json -{ - "component_id": "motor_controller", - "fault_code": "MOTOR_OVERHEAT", - "captured_at": 1735830000.123, - "topics": { - "/motor/temperature": { - "message_type": "sensor_msgs/msg/Temperature", - "data": {"temperature": 85.5, "variance": 0.1} - } - } -} -``` +Snapshots captured when a fault transitioned to CONFIRMED are returned inline +with the fault itself, in `environment_data.snapshots[]` of +`GET /api/v1/{entity-path}/faults/{fault_code}`. There is no separate snapshot +endpoint. **Snapshot Configuration:** @@ -1214,45 +1148,27 @@ default_topics: - /diagnostics ``` -#### GET /api/v1/faults/{fault_code}/snapshots/bag - -Download the rosbag file associated with a fault. This endpoint is only available when rosbag capture is enabled in FaultManager. - -Rosbag capture provides "black box" style recording - a ring buffer continuously records configured topics, and when a fault is confirmed, the buffer is flushed to a bag file. This allows capturing system state both **before and after** fault confirmation. - -**Example:** -```bash -# Download rosbag archive -curl -O -J http://localhost:8080/api/v1/faults/MOTOR_OVERHEAT/snapshots/bag - -# Or save with custom filename -curl http://localhost:8080/api/v1/faults/MOTOR_OVERHEAT/snapshots/bag -o motor_fault.tar.gz -``` - -**Response (200 OK):** -- For directory-based bags (default rosbag2 format): compressed tar.gz archive containing the full bag directory with metadata.yaml and all storage segments -- Content-Type: `application/gzip` -- Content-Disposition: `attachment; filename="fault_MOTOR_OVERHEAT_20260124_153045.tar.gz"` +#### Rosbag Recordings -The archive can be extracted and played directly with `ros2 bag play`. +Rosbag capture provides "black box" style recording - a ring buffer continuously +records configured topics, and when a fault is confirmed the buffer is flushed to +a bag file. This captures system state both **before and after** fault +confirmation. -**Response (404 Not Found - Fault or rosbag not found):** -```json -{ - "error": "Rosbag not found", - "fault_code": "MOTOR_OVERHEAT", - "details": "No rosbag file associated with this fault" -} -``` +A recording is listed and downloaded through the bulk-data endpoints: +`GET /api/v1/{entity-path}/bulk-data/rosbags` for the descriptors and +`GET /api/v1/{entity-path}/bulk-data/rosbags/{recording_id}` for the bytes. The +download serves one storage file, verbatim, named `.` +(`.mcap` or `.sqlite3`). It is not an archive and it does not include the bag's +`metadata.yaml`. -**Response (404 Not Found - Rosbag file deleted):** -```json -{ - "error": "Rosbag file not found", - "fault_code": "MOTOR_OVERHEAT", - "details": "File was deleted or moved" -} -``` +For a recording held in a single storage file, which is the normal case, the +descriptor `size` is that file's length and therefore the length of the +download. A recording that grew past `snapshots.rosbag.max_bag_size_mb` is split +across several storage files and the download hands over only one of them. The +descriptor then reports the recording's total, so `size` exceeds the download's +`Content-Length`. See [the size rule](../../docs/api/rest.rst) in the REST API +reference for the full statement. **Rosbag Configuration:** @@ -1280,17 +1196,28 @@ ros2 run ros2_medkit_fault_manager fault_manager_node \ ``` **Playback downloaded rosbag:** + +The downloaded file is a bag in itself. Point `ros2 bag` straight at it, with no +unpacking step and no `--storage` flag - rosbag2 reads the storage id out of the +file, so the same two commands work for `.mcap` and for `.sqlite3`. + ```bash -# Extract the downloaded archive -tar -xzf fault_MOTOR_OVERHEAT_20260124_153045.tar.gz +# Inspect the downloaded file +ros2 bag info fault_MOTOR_OVERHEAT_1738664999000.mcap -# Play back the bag -ros2 bag play fault_MOTOR_OVERHEAT_1735830000/ +# Play it back +ros2 bag play fault_MOTOR_OVERHEAT_1738664999000.mcap +``` -# Inspect bag contents -ros2 bag info fault_MOTOR_OVERHEAT_1735830000/ +```bash +# The same, for a recording captured with snapshots.rosbag.format: sqlite3 +ros2 bag info fault_MOTOR_OVERHEAT_1738664999000.sqlite3 +ros2 bag play fault_MOTOR_OVERHEAT_1738664999000.sqlite3 ``` +A lone storage file needs no `metadata.yaml` beside it: both commands read the +topics, the message count and the duration out of the file itself. + **Differences from JSON Snapshots:** | Feature | JSON Snapshots | Rosbag Capture | diff --git a/src/ros2_medkit_gateway/include/ros2_medkit_gateway/core/http/handlers/bulkdata_handlers.hpp b/src/ros2_medkit_gateway/include/ros2_medkit_gateway/core/http/handlers/bulkdata_handlers.hpp index 5786d7222..167a5eb3a 100644 --- a/src/ros2_medkit_gateway/include/ros2_medkit_gateway/core/http/handlers/bulkdata_handlers.hpp +++ b/src/ros2_medkit_gateway/include/ros2_medkit_gateway/core/http/handlers/bulkdata_handlers.hpp @@ -14,6 +14,8 @@ #pragma once +#include +#include #include #include #include @@ -102,6 +104,36 @@ class BulkDataHandlers { */ static std::vector download_media_types(); + /** + * @brief Resolve rosbag file path from storage path. + * + * Rosbag2 creates a directory containing the actual db3/mcap file. + * This function resolves the directory to the actual file path. A path that is + * already a regular file is returned unchanged. + * + * The single place that decides which bytes a recording IS, which is why it is + * reachable from outside the class rather than being a private helper of the + * download path. `download()` streams the file this returns and reports its + * length, and `detail::rosbag_served_bytes` sizes the listing through it, so a + * change to which file a recording resolves to moves both at once. + * + * That does not make the two numbers equal in every case, and since the split + * fix it deliberately does not. For a recording held in one storage file the + * listing resolves through here and reports exactly what the download sends. + * For a recording split across several files the listing does not come through + * here at all: it carries the recording's total from the fault manager while + * this route still hands over one file, and the gap is what tells a client the + * transfer is partial. See the size rule in ``docs/api/rest.rst``. + * + * When the bag's own ``metadata.yaml`` names exactly one storage file and that + * file exists, that is the file. Otherwise the directory is scanned for the + * first ``.db3`` or ``.mcap`` in whatever order it yields. + * + * @param path Path to rosbag (can be file or directory) + * @return Resolved file path, or empty string if not found + */ + static std::string resolve_rosbag_file_path(const std::string & path); + private: HandlerContext & ctx_; @@ -114,17 +146,6 @@ class BulkDataHandlers { * to keep the handler's public surface unchanged. */ std::vector get_source_filters(const EntityInfo & entity) const; - - /** - * @brief Resolve rosbag file path from storage path. - * - * Rosbag2 creates a directory containing the actual db3/mcap file. - * This function resolves the directory to the actual file path. - * - * @param path Path to rosbag (can be file or directory) - * @return Resolved file path, or empty string if not found - */ - static std::string resolve_rosbag_file_path(const std::string & path); }; namespace detail { @@ -205,6 +226,41 @@ std::vector rosbag_attached_fault_codes(const nlohmann::json & rosb */ bool rosbag_resolved_by_fault_code(const nlohmann::json & rosbag_data, const std::string & requested_id); +/** + * @brief Bytes a rosbag download puts on the wire for one recording. + * + * Answers only for a recording held in a single storage file, which is the only + * shape where one number describes the transfer. That is a bag directory whose + * ``metadata.yaml`` names one file, or a @p bag_path that is itself a storage + * file, which is one by definition and carries no metadata to consult. + * ``BulkDataHandlers::resolve_rosbag_file_path`` picks that file and the + * download streams it alone, so the length a client is told to expect is that + * file's length and nothing else. Reporting the bag directory's total instead + * overstated every download by ``metadata.yaml`` - on a short recording, by + * around a tenth of the transfer - and a client sizing a buffer or a progress + * bar from the listing never reached the end. + * + * Returns nullopt for anything else, and the caller then keeps the row's own + * figure. That covers a bag this process cannot see or read at all, and it + * covers a recording split across several storage files past the configured + * maximum bag size: the download hands over one segment, so no single file is + * the transfer, and answering with whichever segment the resolver reached first + * advertised a split recording at the size of one part of it. The row's figure + * is the fault manager's answer to the same question, decided from the same + * ``metadata.yaml``, so deferring to it keeps the two API surfaces agreeing on + * one recording. + * + * Never throws and never reports a filesystem error upwards. It runs once per + * row of a listing, and an error here is one unreadable recording, not a failed + * request for the entity's other recordings. + * + * @param bag_path Bag path as stored by the fault manager. A bag directory, or + * a bare storage file, which both answer + * @return The single storage file's size, or nullopt when there is not exactly + * one, or when this process cannot see it + */ +std::optional rosbag_served_bytes(const std::string & bag_path); + /** * @brief Fold rosbag link rows into one descriptor per recording. * @@ -220,6 +276,11 @@ bool rosbag_resolved_by_fault_code(const nlohmann::json & rosbag_data, const std * Order follows first appearance, which is the order the fault manager listed * the rows in. * + * The descriptor size is measured on the file the download resolves (see + * ``rosbag_served_bytes``), not taken from the row. A row whose bag this + * process cannot see keeps the row's own figure: it is the only number left, + * and a recording listed with a zero size reads as an empty one. + * * @param rows Rosbag rows as returned by the fault manager * @param faults_by_code Faults keyed by code, for timestamp enrichment * @return One descriptor per distinct recording diff --git a/src/ros2_medkit_gateway/include/ros2_medkit_gateway/dto/bulkdata.hpp b/src/ros2_medkit_gateway/include/ros2_medkit_gateway/dto/bulkdata.hpp index 69dd40d43..9c8ca8acb 100644 --- a/src/ros2_medkit_gateway/include/ros2_medkit_gateway/dto/bulkdata.hpp +++ b/src/ros2_medkit_gateway/include/ros2_medkit_gateway/dto/bulkdata.hpp @@ -55,7 +55,9 @@ inline constexpr std::string_view dto_name = "BulkDataCate // id - unique file identifier (required) // name - human-readable filename / label (required) // mimetype - MIME type of the file (required) -// size - byte count (required) +// size - byte count the download route serves for this item +// (required). For a rosbag that is the bag's single +// storage file, not the bag directory's total // creation_date - ISO 8601 timestamp string (required) // description - optional human-readable description // x-medkit - optional open vendor extension object; for rosbags: diff --git a/src/ros2_medkit_gateway/src/http/handlers/bulkdata_handlers.cpp b/src/ros2_medkit_gateway/src/http/handlers/bulkdata_handlers.cpp index df98c93f8..730103a70 100644 --- a/src/ros2_medkit_gateway/src/http/handlers/bulkdata_handlers.cpp +++ b/src/ros2_medkit_gateway/src/http/handlers/bulkdata_handlers.cpp @@ -17,10 +17,12 @@ #include "ros2_medkit_gateway/core/faults/fault_scope.hpp" #include +#include #include #include #include #include +#include #include #include #include @@ -30,6 +32,7 @@ #include #include +#include #include "ros2_medkit_gateway/core/http/entity_path_utils.hpp" #include "ros2_medkit_gateway/core/http/error_codes.hpp" @@ -62,6 +65,53 @@ tl::expected parse_path(const http::TypedRequest & re return *info; } +/// The storage files the bag at @p bag_path recorded, named by its own +/// ``metadata.yaml`` in ``relative_file_paths``. +/// +/// This is the bag's own record of what it contains, and it is what the fault +/// manager reads for the same decisions (through +/// ``rosbag2_storage::MetadataIo``). Reading it here rather than inferring the +/// answer from what happens to sit in the directory is what keeps the two sides +/// agreeing about one recording. The gateway already links yaml-cpp, so this +/// costs no new dependency. It does not link rosbag2_storage, which is why the +/// field is read directly instead of through MetadataIo. +/// +/// nullopt when the metadata is missing, unreadable, or not the shape rosbag2 +/// writes - all of which mean the same thing to a caller, that the bag will not +/// say and the directory has to be inspected instead. +std::optional> rosbag_relative_file_paths(const std::string & bag_path) { + const std::filesystem::path metadata_path = std::filesystem::path(bag_path) / "metadata.yaml"; + std::error_code ec; + if (!std::filesystem::is_regular_file(metadata_path, ec)) { + return std::nullopt; + } + try { + const YAML::Node root = YAML::LoadFile(metadata_path.string()); + if (!root.IsMap()) { + return std::nullopt; + } + const YAML::Node info = root["rosbag2_bagfile_information"]; + if (!info || !info.IsMap()) { + return std::nullopt; + } + const YAML::Node paths = info["relative_file_paths"]; + if (!paths || !paths.IsSequence()) { + return std::nullopt; + } + std::vector names; + names.reserve(paths.size()); + for (const auto & entry : paths) { + if (!entry.IsScalar()) { + return std::nullopt; + } + names.push_back(entry.as()); + } + return names; + } catch (const std::exception &) { + return std::nullopt; + } +} + } // namespace BulkDataHandlers::BulkDataHandlers(HandlerContext & ctx) : ctx_(ctx) { @@ -86,21 +136,62 @@ std::vector BulkDataHandlers::download_media_types() { } std::string BulkDataHandlers::resolve_rosbag_file_path(const std::string & path) { + // Every filesystem call below takes the std::error_code overload, and that is + // load-bearing rather than style. This runs once per row of a bulk-data + // listing. With the throwing overloads one unreadable bag directory (EACCES), + // or one removed by quota eviction between the is_directory test and the walk + // (ENOENT), threw out of list(), which has no catch anywhere in its chain, and + // the request answered 500: a single bag nobody could read took every other + // recording of that entity out of the listing with it. Here a bag this process + // cannot read is an empty answer, not a failed request. + std::error_code ec; + // If it's a regular file, return as-is - if (std::filesystem::is_regular_file(path)) { + if (std::filesystem::is_regular_file(path, ec)) { return path; } // If it's a directory (rosbag2 directory structure), find the db3/mcap file inside - if (std::filesystem::is_directory(path)) { - for (const auto & entry : std::filesystem::directory_iterator(path)) { - if (entry.is_regular_file()) { - auto ext = entry.path().extension().string(); - // Look for db3 (sqlite3 format) or mcap files - if (ext == ".db3" || ext == ".mcap") { - return entry.path().string(); - } - } + if (!std::filesystem::is_directory(path, ec)) { + return ""; + } + + // Ask the bag first. When its metadata names exactly one storage file and that + // file is there, that is the file, and directory order does not get a vote. + // Iterating instead returned whichever .db3 or .mcap the directory happened to + // yield first, so a stray file beside the recording - a leftover segment, a + // copy - could be served and sized in place of the real one, while the fault + // manager, which sizes relative_file_paths.front(), reported the other. Same + // question, same evidence, on both sides now. + // + // Several names is a split recording and is deliberately left to the loop + // below: the download's choice of segment there is a separate question from + // this one. No metadata, unreadable metadata, or a named file that is not on + // disk all fall through as well, because then the bag has not answered. + if (const auto names = rosbag_relative_file_paths(path); names && names->size() == 1) { + const std::filesystem::path named = std::filesystem::path(path) / names->front(); + std::error_code named_ec; + if (std::filesystem::is_regular_file(named, named_ec) && !named_ec) { + return named.string(); + } + } + + std::filesystem::directory_iterator it(path, ec); + if (ec) { + return ""; + } + for (const std::filesystem::directory_iterator end; it != end; it.increment(ec)) { + if (ec) { + return ""; + } + std::error_code entry_ec; + if (!it->is_regular_file(entry_ec) || entry_ec) { + continue; + } + auto ext = it->path().extension().string(); + // Look for db3 (sqlite3 format) or mcap files + if (ext == ".db3" || ext == ".mcap") { + return it->path().string(); } } @@ -121,6 +212,53 @@ std::string rosbag_recording_id(const std::string & file_path) { return p.filename().string(); } +std::optional rosbag_served_bytes(const std::string & bag_path) { + if (bag_path.empty()) { + return std::nullopt; + } + + std::error_code path_ec; + const bool is_storage_file = std::filesystem::is_regular_file(bag_path, path_ec) && !path_ec; + + // Only a recording held in a single storage file has a size the download can + // be measured by. Past the configured maximum bag size rosbag2 splits a + // recording across several files and the download route hands over one of + // them, so no single file is "the" transfer. Answering with the segment the + // resolver happened to reach first advertised a split recording at the size of + // one part of it, and disagreed with the fault manager, which reports the + // recording's total for a split. On nullopt the descriptor keeps the row's + // figure, which since the fault manager began sending served bytes IS that + // answer: the storage file for a whole recording, the directory total for a + // split one. + // + // A bag_path that is itself a regular file IS the one storage file, and asking + // its metadata is meaningless because a file has no metadata.yaml beside it + // under that name. The path can be one: the resolver has always accepted a + // bare file, and the download serves it. Checking the count first made the + // helper decline every such row, and a row that carried no figure would then + // have been listed at zero. + if (!is_storage_file) { + const auto names = rosbag_relative_file_paths(bag_path); + if (!names || names->size() != 1) { + return std::nullopt; + } + } + + // The same two steps `download()` performs, in the same order and through the + // same resolver, so the size a client is promised cannot drift from the size + // it is sent. Changing which file a recording resolves to changes both. + const std::string resolved = BulkDataHandlers::resolve_rosbag_file_path(bag_path); + if (resolved.empty()) { + return std::nullopt; + } + std::error_code ec; + const auto size = std::filesystem::file_size(resolved, ec); + if (ec) { + return std::nullopt; + } + return static_cast(size); +} + std::vector rosbag_attached_fault_codes(const nlohmann::json & rosbag_data, const std::string & requested_id) { if (rosbag_data.contains("fault_codes") && rosbag_data["fault_codes"].is_array()) { @@ -206,7 +344,17 @@ fold_rosbag_rows_into_descriptors(const std::vector & rows, // Default to sqlite3 (the historical FaultManager default) when a bag predates // the persisted format field; the per-bag metadata normally carries the real one. entry.format = row.value("format", "sqlite3"); - entry.size_bytes = row.value("size_bytes", uint64_t{0}); + // What the download route will actually send, measured here on the file it + // resolves. The row's figure is the fault manager's own answer to the same + // question: the storage file for a recording held in one file, the bag + // directory's total for one split across several, and the total again for a + // bag whose metadata it could not read. Measuring locally is what keeps the + // listing and the download from drifting apart on this host. Falling back to + // the row is what keeps a recording this process cannot see - a peer's bag, + // an unreadable directory, a split - described by the side that can. Listing + // a zero instead would describe the recording as empty rather than as + // unmeasured here. + entry.size_bytes = rosbag_served_bytes(row.value("file_path", "")).value_or(row.value("size_bytes", uint64_t{0})); entry.duration_sec = row.value("duration_sec", 0.0); entry.created_at_ns = created_at_ns; entry.fault_codes.push_back(fault_code); @@ -491,7 +639,16 @@ http::Result BulkDataHandlers::download(const http::TypedR // URL is not the segment the client sent. filename = rosbag_result.data.value("recording_id", bulk_data_id) + "." + format; - // Rosbag2 emits a directory layout - resolve the inner db3/mcap file. + // Rosbag2 emits a directory layout - resolve the inner db3/mcap file. Only + // that file is served, and metadata.yaml stays on the gateway host. + // + // For a recording held in one storage file, which is the normal case, the + // listing resolved this same path through detail::rosbag_served_bytes and the + // Content-Length below is the number it advertised. For a recording split + // across several files the two deliberately differ: the listing carries the + // recording's total, this route hands over one file, and the descriptor size + // exceeding Content-Length is how a client can tell the transfer is partial. + // See the size rule in docs/api/rest.rst. actual_path = resolve_rosbag_file_path(file_path); } else { // === Non-rosbag categories: served via BulkDataStore === diff --git a/src/ros2_medkit_gateway/test/test_bulkdata_handlers.cpp b/src/ros2_medkit_gateway/test/test_bulkdata_handlers.cpp index c98d65ea1..9395c4e2f 100644 --- a/src/ros2_medkit_gateway/test/test_bulkdata_handlers.cpp +++ b/src/ros2_medkit_gateway/test/test_bulkdata_handlers.cpp @@ -15,9 +15,13 @@ #include #include +#include +#include +#include #include #include #include +#include #include #include @@ -235,6 +239,8 @@ TEST_F(BulkDataHandlersTest, ARowWithNeitherIdNorPathIsDroppedRatherThanAdvertis } TEST_F(BulkDataHandlersTest, DistinctRecordingsEachReportTheirOwnSize) { + // The paths in these rows do not exist on this host, so each descriptor keeps + // the row's own figure - the fallback the sizing test below covers explicitly. const std::vector rows{rosbag_row("A", "fault_A_1", 2048), rosbag_row("B", "fault_B_1", 4096)}; const auto descriptors = handlers::detail::fold_rosbag_rows_into_descriptors(rows, {}); @@ -247,6 +253,352 @@ TEST_F(BulkDataHandlersTest, NoRowsYieldsNoDescriptors) { EXPECT_TRUE(handlers::detail::fold_rosbag_rows_into_descriptors({}, {}).empty()); } +// === Descriptor size vs served bytes === +// A rosbag2 bag is a directory: one storage file plus metadata.yaml. The +// download resolves the storage file and streams that alone, so the descriptor +// has to be sized on the same file. The fault manager's stored figure is the +// directory total, which is the recording's disk footprint and larger than the +// transfer. Reporting it made every listing overstate the download. + +class RosbagBagDirectoryTest : public ::testing::Test { + protected: + void SetUp() override { + bag_dir_ = std::filesystem::temp_directory_path() / + ("bulkdata_bag_test_" + std::to_string(getpid()) + "_" + std::to_string(counter_++)); + std::filesystem::create_directories(bag_dir_); + write_file(bag_dir_ / "recording_0.db3", std::string(4096, 'x')); + write_metadata(bag_dir_, {"recording_0.db3"}); + } + + void TearDown() override { + std::error_code ec; + std::filesystem::remove_all(bag_dir_, ec); + } + + static void write_file(const std::filesystem::path & path, const std::string & content) { + std::ofstream out(path, std::ios::binary); + out << content; + } + + /// A ``metadata.yaml`` in the shape rosbag2 writes, naming @p storage_files in + /// ``relative_file_paths``. Only the fields this code reads are filled in, but + /// the nesting is the real one: the helper looks up + /// ``rosbag2_bagfile_information.relative_file_paths``, so a flat document + /// would pass a test that production data fails. + static void write_metadata(const std::filesystem::path & dir, const std::vector & storage_files) { + std::string yaml = + "rosbag2_bagfile_information:\n" + " version: 9\n" + " storage_identifier: sqlite3\n" + " message_count: 0\n" + " relative_file_paths:\n"; + for (const auto & file : storage_files) { + yaml += " - " + file + "\n"; + } + yaml += " ros_distro: jazzy\n"; + write_file(dir / "metadata.yaml", yaml); + } + + // What the fault manager stores: every regular file under the bag directory. + uint64_t directory_total() const { + uint64_t total = 0; + for (const auto & entry : std::filesystem::recursive_directory_iterator(bag_dir_)) { + if (entry.is_regular_file()) { + total += entry.file_size(); + } + } + return total; + } + + std::filesystem::path bag_dir_; + static int counter_; +}; + +int RosbagBagDirectoryTest::counter_ = 0; + +TEST_F(RosbagBagDirectoryTest, DescriptorSizeIsTheBytesTheDownloadServesNotTheBagDirectoryTotal) { + // The two operations download() performs to fill Content-Length: resolve the + // bag directory to its storage file, then take that file's size. + const std::string served_path = BulkDataHandlers::resolve_rosbag_file_path(bag_dir_.string()); + ASSERT_EQ(served_path, (bag_dir_ / "recording_0.db3").string()); + const uint64_t served_bytes = std::filesystem::file_size(served_path); + + // Not vacuous: the directory holds metadata.yaml as well, so the stored figure + // and the served figure are genuinely different numbers. + ASSERT_GT(directory_total(), served_bytes); + + // The row carries the directory total, which is what the fault manager stores. + const json row{{"fault_code", "MOTOR_OVERHEAT"}, + {"recording_id", bag_dir_.filename().string()}, + {"file_path", bag_dir_.string()}, + {"format", "sqlite3"}, + {"duration_sec", 6.0}, + {"size_bytes", directory_total()}}; + + const auto descriptors = handlers::detail::fold_rosbag_rows_into_descriptors({row}, {}); + ASSERT_EQ(descriptors.size(), 1u); + EXPECT_EQ(descriptors[0].size, served_bytes) << "the listing must promise the bytes the download sends"; + EXPECT_NE(descriptors[0].size, directory_total()) << "metadata.yaml is not served, so it must not be counted"; +} + +TEST_F(RosbagBagDirectoryTest, ServedBytesIsUnknownRatherThanZeroWhenTheBagIsNotVisible) { + // Positive control for the absence below: the same helper does answer for a + // bag it can see, so a nullopt is the missing bag and not a broken helper. + ASSERT_TRUE(handlers::detail::rosbag_served_bytes(bag_dir_.string()).has_value()); + + EXPECT_FALSE(handlers::detail::rosbag_served_bytes("").has_value()); + EXPECT_FALSE(handlers::detail::rosbag_served_bytes((bag_dir_ / "no_such_bag").string()).has_value()); + + // A directory with no metadata.yaml and no storage file in it. The metadata + // gate is what declines here, before the resolver is reached: the bag does not + // say how many storage files it holds, so this side will not guess one. The + // resolver would also find nothing, but that is no longer what the test turns + // on. + const auto empty_bag = bag_dir_ / "empty_bag"; + std::filesystem::create_directories(empty_bag); + EXPECT_FALSE(handlers::detail::rosbag_served_bytes(empty_bag.string()).has_value()); +} + +TEST_F(RosbagBagDirectoryTest, ASplitRecordingIsListedAtTheRowsFigureNotAtOneSegment) { + // Past the configured maximum bag size rosbag2 splits a recording across + // several storage files. The download route hands over whichever one the + // resolver reaches first, so no single file is the transfer, and sizing the + // descriptor by that file advertised a split recording at the size of one part + // of it. The fault manager reports the recording's total for a split, and the + // two API surfaces have to agree on one recording. + const auto split_dir = bag_dir_ / "split"; + std::filesystem::create_directories(split_dir); + write_file(split_dir / "split_0.db3", std::string(16384, 'a')); + write_file(split_dir / "split_1.db3", std::string(53248, 'b')); + write_metadata(split_dir, {"split_0.db3", "split_1.db3"}); + + uint64_t split_total = 0; + for (const auto & entry : std::filesystem::recursive_directory_iterator(split_dir)) { + if (entry.is_regular_file()) { + split_total += entry.file_size(); + } + } + const uint64_t first_segment = std::filesystem::file_size(split_dir / "split_0.db3"); + const uint64_t second_segment = std::filesystem::file_size(split_dir / "split_1.db3"); + + // The row carries what the fault manager reports for a split: the total. + const json row{{"fault_code", "SPLIT_FAULT"}, + {"recording_id", "fault_SPLIT_FAULT_1738664999000"}, + {"file_path", split_dir.string()}, + {"format", "sqlite3"}, + {"duration_sec", 6.0}, + {"size_bytes", split_total}}; + + const auto descriptors = handlers::detail::fold_rosbag_rows_into_descriptors({row}, {}); + ASSERT_EQ(descriptors.size(), 1u); + EXPECT_EQ(descriptors[0].size, split_total) << "a split recording keeps the figure the fault manager reported"; + EXPECT_NE(descriptors[0].size, first_segment) << "one segment is not the recording"; + EXPECT_NE(descriptors[0].size, second_segment) << "and neither is the other"; + + // The helper declines rather than guessing, which is what makes the fallback fire. + EXPECT_FALSE(handlers::detail::rosbag_served_bytes(split_dir.string()).has_value()); +} + +TEST_F(RosbagBagDirectoryTest, ABareStorageFileIsItsOwnRecordingAndIsSizedAsSuch) { + // A row's file_path can be the storage file itself rather than a bag + // directory. The resolver has always accepted that and the download serves it, + // so the listing has to size it too. A bare file has no metadata.yaml beside it + // under that name, so consulting the metadata first made the helper decline + // every such row - harmless while the row carries a figure to fall back on, and + // a recording listed at zero the moment one does not. + const auto bare_file = bag_dir_ / "standalone_recording.db3"; + write_file(bare_file, std::string(7168, 'z')); + const uint64_t bare_size = std::filesystem::file_size(bare_file); + + EXPECT_EQ(handlers::detail::rosbag_served_bytes(bare_file.string()), bare_size); + + const json row{{"fault_code", "BARE_FILE_FAULT"}, + {"recording_id", "standalone_recording.db3"}, + {"file_path", bare_file.string()}, + {"format", "sqlite3"}, + {"size_bytes", 1}}; + + const auto descriptors = handlers::detail::fold_rosbag_rows_into_descriptors({row}, {}); + ASSERT_EQ(descriptors.size(), 1u); + EXPECT_EQ(descriptors[0].size, bare_size) << "a bare storage file is measured, not declined"; + EXPECT_NE(descriptors[0].size, 1u) << "and the row's figure is not what was reported"; +} + +TEST_F(RosbagBagDirectoryTest, TheMetadataNamesTheStorageFileRatherThanDirectoryOrder) { + // A stray .db3 beside the recording - a leftover segment, a copy - used to be + // servable and sizeable in place of the real one, because the resolver took + // whichever file the directory iterator yielded first. The fault manager sizes + // relative_file_paths.front() (rosbag_capture.cpp, rosbag_served_bytes), so the + // two sides reported different numbers for the same directory. The bag's own + // metadata is the tie-break on both sides now. + const auto strays = bag_dir_ / "with_stray"; + std::filesystem::create_directories(strays); + write_file(strays / "recording_0.db3", std::string(4096, 'a')); + write_file(strays / "recording_1.db3", std::string(65536, 'b')); + write_metadata(strays, {"recording_0.db3"}); + + const uint64_t named_size = std::filesystem::file_size(strays / "recording_0.db3"); + const uint64_t stray_size = std::filesystem::file_size(strays / "recording_1.db3"); + ASSERT_NE(named_size, stray_size) << "the two files are the same size, so nothing is being told apart"; + + // The download resolves the named file, so the bytes on the wire are its bytes. + EXPECT_EQ(BulkDataHandlers::resolve_rosbag_file_path(strays.string()), (strays / "recording_0.db3").string()); + EXPECT_EQ(handlers::detail::rosbag_served_bytes(strays.string()), named_size); + + const json row{{"fault_code", "STRAY_FAULT"}, + {"recording_id", "with_stray"}, + {"file_path", strays.string()}, + {"format", "sqlite3"}, + {"size_bytes", 999999}}; + + const auto descriptors = handlers::detail::fold_rosbag_rows_into_descriptors({row}, {}); + ASSERT_EQ(descriptors.size(), 1u); + // 4096 is also what the fault manager's own helper answers for this directory + // shape, which is the point of reading the same field on both sides. Its + // behaviour is pinned by ReportsTheStorageFileNotTheDirectoryTotal in + // test_rosbag_capture.cpp. + EXPECT_EQ(descriptors[0].size, named_size) << "the listing must report the file the bag names"; + EXPECT_EQ(descriptors[0].size, 4096u) << "and that is the number the fault manager reports too"; + EXPECT_NE(descriptors[0].size, stray_size) << "directory order must not decide which file a recording is"; +} + +// A bag directory this process cannot walk must cost its own row and nothing +// else. The resolver used the throwing filesystem overloads, so one EACCES or +// ENOENT threw out of the listing handler, which has no catch in its chain, and +// the whole request answered 500 - every recording of the entity gone because of +// one unreadable directory. +// +// The trigger is a symlink loop rather than a 0000 directory because it has to +// be refused for any uid, and these tests do not run under one uid. In CI they +// run as root: the workflow's jobs declare a plain `container:` with no `user:` +// key, and that runs as uid 0. Locally they run as uid 1000. Root ignores mode +// bits, so a 0000 directory is readable in CI and a test built on one would pass +// there without the failure it claims to reproduce. ELOOP is refused for every +// uid alike, so this case means the same thing in both places. +class UnreadableBagTest : public ::testing::Test { + protected: + void SetUp() override { + root_ = std::filesystem::temp_directory_path() / + ("bulkdata_unreadable_" + std::to_string(getpid()) + "_" + std::to_string(counter_++)); + std::filesystem::create_directories(root_); + + // Readable control bag: one storage file, real metadata. + readable_ = root_ / "readable_bag"; + std::filesystem::create_directories(readable_); + { + std::ofstream out(readable_ / "recording_0.db3", std::ios::binary); + out << std::string(2048, 'x'); + } + { + std::ofstream out(readable_ / "metadata.yaml", std::ios::binary); + out << "rosbag2_bagfile_information:\n version: 9\n relative_file_paths:\n - recording_0.db3\n"; + } + + // Unreadable bag: a symlink pointing at itself. Every filesystem query on it + // fails with ELOOP, for root as much as for anyone else. + loop_ = root_ / "loop_bag"; + std::error_code ec; + std::filesystem::create_symlink(loop_, loop_, ec); + symlink_created_ = !ec; + } + + void TearDown() override { + std::error_code ec; + std::filesystem::remove_all(root_, ec); + } + + std::filesystem::path root_; + std::filesystem::path readable_; + std::filesystem::path loop_; + bool symlink_created_{false}; + static int counter_; +}; + +int UnreadableBagTest::counter_ = 0; + +TEST_F(UnreadableBagTest, AnUnreadableBagCostsItsOwnRowAndNotTheListing) { + ASSERT_TRUE(symlink_created_) << "could not create the symlink loop, so nothing is being tested"; + // The loop really is refused by the filesystem, whatever uid this runs as. + std::error_code probe_ec; + const bool loop_is_a_directory = std::filesystem::is_directory(loop_, probe_ec); + ASSERT_TRUE(static_cast(probe_ec)) << "the symlink loop resolved, so it is not an unreadable bag"; + ASSERT_FALSE(loop_is_a_directory) << "a path that errored cannot also be a readable directory"; + + const uint64_t readable_served = std::filesystem::file_size(readable_ / "recording_0.db3"); + + const std::vector rows{ + json{{"fault_code", "READABLE"}, + {"recording_id", "fault_READABLE_1"}, + {"file_path", readable_.string()}, + {"format", "sqlite3"}, + {"size_bytes", 999999}}, + json{{"fault_code", "UNREADABLE"}, + {"recording_id", "fault_UNREADABLE_1"}, + {"file_path", loop_.string()}, + {"format", "sqlite3"}, + {"size_bytes", 4242}}, + }; + + // The listing answers, and answers with BOTH recordings. + const auto descriptors = handlers::detail::fold_rosbag_rows_into_descriptors(rows, {}); + ASSERT_EQ(descriptors.size(), 2u) << "an unreadable bag removed another recording from the listing"; + EXPECT_EQ(descriptors[0].id, "fault_READABLE_1"); + EXPECT_EQ(descriptors[0].size, readable_served) << "the readable bag is still measured locally"; + EXPECT_EQ(descriptors[1].id, "fault_UNREADABLE_1"); + EXPECT_EQ(descriptors[1].size, 4242u) << "the unreadable bag keeps the figure its row carried"; + + // These two are the assertions that actually pin the throwing overloads, and the + // listing assertion above is defence in depth rather than the guard. Order is + // why: rosbag_served_bytes reads the bag's metadata before it resolves any file, + // and an unreadable bag has no readable metadata either, so it returns nullopt + // before the resolver is ever reached. download() has no such gate in front of + // it - it calls the resolver directly - so the resolver's own refusal to throw + // is what that route depends on, and it is asserted here directly. + EXPECT_NO_THROW({ EXPECT_FALSE(handlers::detail::rosbag_served_bytes(loop_.string()).has_value()); }); + EXPECT_NO_THROW({ EXPECT_EQ(BulkDataHandlers::resolve_rosbag_file_path(loop_.string()), ""); }); +} + +// The second shape: a directory whose mode denies everyone. This one does test +// something under uid 1000, where it runs today, and cannot under uid 0, where CI +// runs it. It probes first and skips with the uid rather than passing on a +// permission that was never actually denied. +TEST_F(UnreadableBagTest, AModeZeroDirectoryIsAlsoDeclinedRatherThanThrown) { + const auto locked = root_ / "locked_bag"; + std::filesystem::create_directories(locked); + { + std::ofstream out(locked / "recording_0.db3", std::ios::binary); + out << std::string(1024, 'x'); + } + std::error_code ec; + std::filesystem::permissions(locked, std::filesystem::perms::none, ec); + ASSERT_FALSE(static_cast(ec)) << "could not drop the directory's permissions"; + + std::error_code probe_ec; + std::filesystem::directory_iterator probe(locked, probe_ec); + if (!probe_ec) { + std::filesystem::permissions(locked, std::filesystem::perms::owner_all, ec); + GTEST_SKIP() << "running as uid " << ::getuid() << ", which ignores mode bits, so a 0000 directory is readable. " + << "The symlink-loop case above is the one that covers every uid"; + } + + EXPECT_NO_THROW({ EXPECT_FALSE(handlers::detail::rosbag_served_bytes(locked.string()).has_value()); }); + EXPECT_NO_THROW({ EXPECT_EQ(BulkDataHandlers::resolve_rosbag_file_path(locked.string()), ""); }); + + std::filesystem::permissions(locked, std::filesystem::perms::owner_all, ec); +} + +TEST_F(RosbagBagDirectoryTest, AnUnreachableBagKeepsTheStoredFigureRatherThanReportingZero) { + const json row{{"fault_code", "MOTOR_OVERHEAT"}, + {"recording_id", "fault_MOTOR_OVERHEAT_1738664999000"}, + {"file_path", (bag_dir_ / "gone").string()}, + {"format", "sqlite3"}, + {"size_bytes", 35943}}; + + const auto descriptors = handlers::detail::fold_rosbag_rows_into_descriptors({row}, {}); + ASSERT_EQ(descriptors.size(), 1u); + EXPECT_EQ(descriptors[0].size, 35943u); +} + // === Shared timestamp utility tests === // @verifies REQ_INTEROP_071 diff --git a/src/ros2_medkit_integration_tests/test/features/test_bulk_data_api.test.py b/src/ros2_medkit_integration_tests/test/features/test_bulk_data_api.test.py index 0c70027f5..d2faf125e 100644 --- a/src/ros2_medkit_integration_tests/test/features/test_bulk_data_api.test.py +++ b/src/ros2_medkit_integration_tests/test/features/test_bulk_data_api.test.py @@ -219,6 +219,51 @@ def test_bulk_data_unknown_category_returns_404(self): data = response.json() self.assertIn('error_code', data) + def test_bulk_data_descriptor_size_is_the_download_length(self): + """The descriptor's size is the number of bytes the download sends. + + A client sizes a buffer or a progress bar from the listing, so the + listing has to promise what the transfer delivers. Nothing else here + connects the two: the structure test above only checks that a size + field exists, and a wrong number passes that. + + The test recording is far below snapshots.rosbag.max_bag_size_mb, so it + is held in one storage file. That is the case where the descriptor size + and the download length are defined to be equal; a split recording is + reported at its total and is deliberately larger than its download. + + @verifies REQ_INTEROP_073 + """ + data = self.poll_endpoint_until( + '/apps/lidar_sensor/bulk-data/rosbags', + lambda d: d if d.get('items') else None, + timeout=10.0, + interval=1.0, + ) + self.assertGreater( + len(data['items']), 0, 'Expected at least one rosbag descriptor', + ) + descriptor = data['items'][0] + + response = requests.get( + f'{self.BASE_URL}/apps/lidar_sensor/bulk-data/rosbags/' + f'{descriptor["id"]}', + timeout=30, + ) + self.assertEqual(response.status_code, 200) + + body = response.content + self.assertGreater(len(body), 0, 'Download served an empty body') + self.assertEqual( + descriptor['size'], len(body), + f'Listing promised {descriptor["size"]} bytes and the download ' + f'sent {len(body)}', + ) + self.assertEqual( + int(response.headers['Content-Length']), len(body), + 'Content-Length disagrees with the body it described', + ) + def test_bulk_data_download_not_found(self): """Bulk-data download returns 404 for invalid UUID.