diff --git a/.gitignore b/.gitignore
index c6b0d5f..c21916d 100644
--- a/.gitignore
+++ b/.gitignore
@@ -43,7 +43,12 @@ Thumbs.db
 .cache/
 
 simulation.json
+# Зовнішня MAVLink-бібліотека (склонований окремий git-репозиторій)
+drone_simulation_mavlink/c_library_v2/
+
+.idea/
 
 homework_13/robot_ws/install/
 homework_13/robot_ws/build/
-homework_13/robot_ws/log/
\ No newline at end of file
+homework_13/robot_ws/log/
+
diff --git a/.vscode/extensions.json b/.vscode/extensions.json
index bd817ad..922946d 100644
--- a/.vscode/extensions.json
+++ b/.vscode/extensions.json
@@ -3,6 +3,7 @@
   // студента, щоб відкрити репозиторій у devcontainer. C++ інструменти
   // встановлюється всередині контейнера через .devcontainer/devcontainer.json.
   "recommendations": [
-    "ms-vscode-remote.remote-containers"
+    "ms-vscode-remote.remote-containers",
+    "wokwi.wokwi-vscode"
   ]
 }
diff --git a/homework_36_esp32/.gitignore b/homework_36_esp32/.gitignore
new file mode 100644
index 0000000..51c9513
--- /dev/null
+++ b/homework_36_esp32/.gitignore
@@ -0,0 +1,3 @@
+build/
+sdkconfig
+sdkconfig.old
\ No newline at end of file
diff --git a/homework_36_esp32/CMakeLists.txt b/homework_36_esp32/CMakeLists.txt
new file mode 100644
index 0000000..23c408c
--- /dev/null
+++ b/homework_36_esp32/CMakeLists.txt
@@ -0,0 +1,3 @@
+cmake_minimum_required(VERSION 3.16)
+include($ENV{IDF_PATH}/tools/cmake/project.cmake)
+project(homework_36_esp32)
\ No newline at end of file
diff --git a/homework_36_esp32/components/device_core/CMakeLists.txt b/homework_36_esp32/components/device_core/CMakeLists.txt
new file mode 100644
index 0000000..37471d0
--- /dev/null
+++ b/homework_36_esp32/components/device_core/CMakeLists.txt
@@ -0,0 +1,4 @@
+idf_component_register(
+    SRCS "src/device_core.cpp"
+    INCLUDE_DIRS "include"
+)
\ No newline at end of file
diff --git a/homework_36_esp32/components/device_core/include/device_core.hpp b/homework_36_esp32/components/device_core/include/device_core.hpp
new file mode 100644
index 0000000..1e32e48
--- /dev/null
+++ b/homework_36_esp32/components/device_core/include/device_core.hpp
@@ -0,0 +1,29 @@
+#pragma once
+#include <cstdint>
+#include <cstddef>
+
+namespace core {
+
+enum class CmdType { 
+    None, 
+    SetPeriod,
+    Unknown
+};
+
+struct AccelSample { float ax, ay, az; };
+
+struct Command {
+    CmdType type= CmdType::None;
+    uint32_t period_ms = 0;
+};
+
+AccelSample accel_from_raw(int16_t rx, int16_t ry, int16_t rz);
+
+const char* mode_from_period(uint32_t period_ms);
+
+int format_status(char* out, size_t out_size,
+                  int64_t t_ms, const AccelSample& a, uint32_t period_ms);
+
+Command parse_command(const char* line);
+
+}  // namespace core
\ No newline at end of file
diff --git a/homework_36_esp32/components/device_core/src/device_core.cpp b/homework_36_esp32/components/device_core/src/device_core.cpp
new file mode 100644
index 0000000..f999fbe
--- /dev/null
+++ b/homework_36_esp32/components/device_core/src/device_core.cpp
@@ -0,0 +1,39 @@
+#include "device_core.hpp"
+#include <cstdio>
+
+namespace core {
+
+AccelSample accel_from_raw(int16_t rx, int16_t ry, int16_t rz)
+{
+    return { rx / 16384.0f, ry / 16384.0f, rz / 16384.0f };
+}
+
+const char* mode_from_period(uint32_t period_ms)
+{
+    return (period_ms <= 250) ? "fast" : "slow";
+}
+
+int format_status(char* out, size_t out_size,
+                  int64_t t_ms, const AccelSample& a, uint32_t period_ms)
+{
+    return snprintf(out, out_size,
+        "t=%lld ms  ax=%.2f ay=%.2f az=%.2f  mode=%s",
+        (long long)t_ms, a.ax, a.ay, a.az, mode_from_period(period_ms));
+}
+
+Command parse_command(const char* line)
+{
+    Command cmd;
+    unsigned int val = 0;
+    if (sscanf(line, "p %u", &val) == 1) {
+        cmd.type = CmdType::SetPeriod;
+        cmd.period_ms = val;
+        
+        return cmd;
+    }
+    cmd.type = CmdType::Unknown;
+
+    return cmd;
+}
+
+}  // namespace core
\ No newline at end of file
diff --git a/homework_36_esp32/diagram.json b/homework_36_esp32/diagram.json
new file mode 100644
index 0000000..85ea9b2
--- /dev/null
+++ b/homework_36_esp32/diagram.json
@@ -0,0 +1,24 @@
+{
+  "version": 1,
+  "author": "cMiltech",
+  "editor": "wokwi",
+  "parts": [
+    { "type": "board-esp32-s3-devkitc-1", "id": "esp", "top": 0, "left": 0, "attrs": {} },
+    { "type": "wokwi-mpu6050", "id": "imu", "top": 40, "left": 320, "attrs": {} },
+    { "type": "board-ssd1306", "id": "oled", "top": 220, "left": 320, "attrs": { "i2cAddress": "0x3c" } }
+  ],
+  "connections": [
+    [ "esp:TX", "$serialMonitor:RX", "", [] ],
+    [ "esp:RX", "$serialMonitor:TX", "", [] ],
+
+    [ "imu:SDA", "esp:8", "green", [] ],
+    [ "imu:SCL", "esp:9", "yellow", [] ],
+    [ "imu:VCC", "esp:3V3.1", "red", [] ],
+    [ "imu:GND", "esp:GND.1", "black", [] ],
+
+    [ "oled:DATA", "esp:8", "green", [] ],
+    [ "oled:CLK", "esp:9", "yellow", [] ],
+    [ "oled:3V3", "esp:3V3.1", "red", [] ],
+    [ "oled:GND", "esp:GND.1", "black", [] ]
+  ]
+}
diff --git a/homework_36_esp32/main/CMakeLists.txt b/homework_36_esp32/main/CMakeLists.txt
new file mode 100644
index 0000000..6d1dd3f
--- /dev/null
+++ b/homework_36_esp32/main/CMakeLists.txt
@@ -0,0 +1,5 @@
+idf_component_register(
+    SRCS "main.cpp"
+    INCLUDE_DIRS "."
+    REQUIRES esp_timer esp_driver_i2c esp_driver_uart device_core
+)
\ No newline at end of file
diff --git a/homework_36_esp32/main/main.cpp b/homework_36_esp32/main/main.cpp
new file mode 100644
index 0000000..6f73443
--- /dev/null
+++ b/homework_36_esp32/main/main.cpp
@@ -0,0 +1,155 @@
+#include <cstdio>
+#include <cstdint>
+#include <cstring>
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "esp_timer.h"
+#include "driver/i2c_master.h"
+#include "esp_err.h"
+#include "driver/uart.h"
+#include "device_core.hpp"
+
+static constexpr gpio_num_t PIN_SDA = GPIO_NUM_8;
+static constexpr gpio_num_t PIN_SCL = GPIO_NUM_9;
+static constexpr uint8_t MPU_ADDR = 0x68;
+static constexpr uint8_t REG_PWR1 = 0x6B;
+static constexpr uint8_t REG_ACCEL = 0x3B;
+static constexpr uart_port_t UART_PORT = UART_NUM_0;
+
+static volatile bool g_tick = false;
+static volatile uint32_t g_tick_count = 0;
+
+static void on_timer(void*)
+{
+    g_tick = true;
+    g_tick_count = g_tick_count + 1;
+}
+
+static i2c_master_dev_handle_t s_mpu = nullptr;
+
+static esp_err_t mpu_init(void)
+{
+    i2c_master_bus_config_t bus_cfg = {};
+    bus_cfg.i2c_port = I2C_NUM_0;
+    bus_cfg.sda_io_num = PIN_SDA;
+    bus_cfg.scl_io_num = PIN_SCL;
+    bus_cfg.clk_source = I2C_CLK_SRC_DEFAULT;
+    bus_cfg.glitch_ignore_cnt = 7;
+    bus_cfg.flags.enable_internal_pullup = true;
+    
+    i2c_master_bus_handle_t bus = nullptr;
+    ESP_ERROR_CHECK(i2c_new_master_bus(&bus_cfg, &bus));
+
+    i2c_device_config_t dev_cfg = {};
+    dev_cfg.dev_addr_length = I2C_ADDR_BIT_LEN_7;
+    dev_cfg.device_address = MPU_ADDR;
+    dev_cfg.scl_speed_hz = 400000;
+    
+    ESP_ERROR_CHECK(i2c_master_bus_add_device(bus, &dev_cfg, &s_mpu));
+
+    // wakeup value = 0
+    uint8_t wake[2] = { REG_PWR1, 0x00 };
+
+    return i2c_master_transmit(s_mpu, wake, sizeof(wake), 100);
+}
+
+static esp_err_t mpu_read_accel(core::AccelSample& out)
+{
+    uint8_t reg = REG_ACCEL;
+    uint8_t buf[6] = {};
+    esp_err_t err = i2c_master_transmit_receive(s_mpu, &reg, 1, buf, sizeof(buf), 100);
+    if (err != ESP_OK) return err;
+
+    int16_t rx = (int16_t)((buf[0] << 8) | buf[1]);
+    int16_t ry = (int16_t)((buf[2] << 8) | buf[3]);
+    int16_t rz = (int16_t)((buf[4] << 8) | buf[5]);
+    out = core::accel_from_raw(rx, ry, rz);
+    return ESP_OK;
+}
+
+static void uart_init(void)
+{
+    uart_config_t cfg = {};
+    cfg.baud_rate = 115200;
+    cfg.data_bits = UART_DATA_8_BITS;
+    cfg.parity = UART_PARITY_DISABLE;
+    cfg.stop_bits = UART_STOP_BITS_1;
+    cfg.flow_ctrl = UART_HW_FLOWCTRL_DISABLE;
+    cfg.source_clk = UART_SCLK_DEFAULT;
+
+    ESP_ERROR_CHECK(uart_driver_install(UART_PORT, 256, 0, 0, nullptr, 0));
+    ESP_ERROR_CHECK(uart_param_config(UART_PORT, &cfg));
+}
+
+static void handle_command(const char* line, esp_timer_handle_t timer, uint32_t& period_ms)
+{
+    core::Command cmd = core::parse_command(line);
+    switch (cmd.type) {
+        case core::CmdType::SetPeriod:
+            if (cmd.period_ms >= 20 && cmd.period_ms <= 10000) {
+                period_ms = cmd.period_ms;
+                esp_timer_stop(timer);
+                esp_timer_start_periodic(timer, (uint64_t)period_ms * 1000ULL);
+                printf("OK period=%ums\n", (unsigned)period_ms);
+            } else {
+                printf("ERR period out of range 20..10000\n");
+            }
+            break;
+        default:
+            printf("ERR unknown cmd: '%s'\n", line);
+            break;
+    }
+}
+
+extern "C" void app_main(void)
+{
+    ESP_ERROR_CHECK(mpu_init());
+    uart_init();
+
+    const esp_timer_create_args_t timer_args = {
+        .callback = &on_timer,
+        .arg = nullptr,
+        .dispatch_method = ESP_TIMER_TASK,
+        .name = "sample_tick",
+        .skip_unhandled_events = true
+    };
+    esp_timer_handle_t timer = nullptr;
+    ESP_ERROR_CHECK(esp_timer_create(&timer_args, &timer));
+
+    uint32_t period_ms = 200;
+    ESP_ERROR_CHECK(esp_timer_start_periodic(timer, period_ms * 1000ULL));
+
+    char line[64];
+    int idx = 0;
+
+    while (1) {
+        uint8_t ch;
+        while (uart_read_bytes(UART_PORT, &ch, 1, 0) == 1) {
+            if (ch == '\n' || ch == '\r') {
+                if (idx > 0) {
+                    line[idx] = '\0';
+                    handle_command(line, timer, period_ms);
+                    idx = 0;
+                }
+            } else if (idx < (int)sizeof(line) - 1) {
+                line[idx++] = (char)ch;
+            } else {
+                idx = 0;
+            }
+        }
+
+        if (g_tick) {
+            g_tick = false;
+            int64_t t_ms = esp_timer_get_time() / 1000;
+
+            core::AccelSample a;
+            if (mpu_read_accel(a) == ESP_OK) {
+                char buf[96];
+                core::format_status(buf, sizeof(buf), t_ms, a, period_ms);
+                printf("%s\n", buf);
+            }
+        }
+
+        vTaskDelay(pdMS_TO_TICKS(5));
+    }
+}
\ No newline at end of file
diff --git a/homework_36_esp32/sdkconfig.defaults b/homework_36_esp32/sdkconfig.defaults
new file mode 100644
index 0000000..ef2cb5e
--- /dev/null
+++ b/homework_36_esp32/sdkconfig.defaults
@@ -0,0 +1,3 @@
+CONFIG_IDF_TARGET="esp32s3"
+CONFIG_ESP_CONSOLE_UART_DEFAULT=y
+CONFIG_ESP_MAIN_TASK_STACK_SIZE=4096
\ No newline at end of file
diff --git a/homework_36_esp32/wokwi.toml b/homework_36_esp32/wokwi.toml
new file mode 100644
index 0000000..84aced2
--- /dev/null
+++ b/homework_36_esp32/wokwi.toml
@@ -0,0 +1,4 @@
+[wokwi]
+version = 1
+firmware = 'build/homework_36_esp32.bin'
+elf = 'build/homework_36_esp32.elf'
\ No newline at end of file